FAQ

How do I know the device is in AP Mode?

In AP Mode, the LED will slowly fade in and out (breathing effect) to indicate it’s ready for setup.

---

How to restore factory settings?

After wake-up, press and hold the button for more than 10 seconds after wake-up to clear all saved settings and reboot the device.

---

How to enter the configuration page (AP Mode)?

After wake-up, press the button 4 times within 20 seconds. The LED will blink rapidly before AP Mode starts.

---

Will I be notified when battery is low?

The device sends a low_battery MQTT message; Home Assistant can display notifications.

---

Which smart home platforms are supported?

Any platform supporting MQTT, such as Home Assistant, openHAB, Node-RED, Domoticz, etc.